TCP-IP Serial Port

Delphi ile ilgili faydalı site adreslerini buraya gönderebilirsiniz.
Kullanıcı avatarı
Mesajlar: 2360
Kayıt: 05 Şub 2004 04:32
Konum: Beşiktaş

TCP-IP Serial Port

Mesaj gönderen mege »

TCP IP üzerindeki iki makinanın seri portlarını birleştiren veya, networkdeki bir seri porta erişen bir program...

hernekadar bende yazarım desemde :P kasmaya gerek yok dimi :)

ReMapPro Version 2.2 TCP/IP over COM port utility

The main utility, the Comport, is included in the ReMapPro package makes serial (RS232) data from your PC available on TCP/IP-based networks and makes TCP/IP data available on serial ports on your PC. This makes it possible for any other computer on the same network to send and receive serial data through a remote serial port on the PC where the Comport is running. You can connect to the remote serial port by connecting to a TCP/IP port. The Comport can also be used to pass the serial data across a corporate intranet or over the Internet. The Comport allows multiple sessions to run simultaneously but each with a different serial port.

The Comport supports full two-way I/O for full control of serial instruments (i.e. any instrument that you can plug into the serial port (RS232, RS422 or RS485) of your PC). Typical devices include most serial devices like gauges, scales and balances, sensors, micrometers, calipers, bar code scanners, densitometers, laboratory instruments, electronic balance or electronic measuring instrument, RF equipment, communication systems, etc...